Cycling enthusiasts have their own bike when the baby, ready to carry out maintenance on it, oil is common. Oiling the bicycle, just moving parts you really need, also is the mutual contact metal piece movement. Do not use the dirty oil that you find in your garage. If the oil is too thin will quickly evaporate, can not maintain the role; if too thick, it will stay on the top, a large amount of dust attached.

How to grease your bike

Pay special attention to the following parts:

Chain: the chain is the main transmission components on a bicycle, and most in need of care, most often need oiling place. If you ride in dusty or muddy environments, you should clean the chain regularly.

Transmission: before and after you dial the dial is the shifting chain speed parts. They are composed of numerous small moving parts, also includes two guide. You should keep them clean and lubricated so that they will not stick together or become stiff. When you are on the move, check that the transmission is functioning properly, and then lubricate any moving parts using the oil.

Brake lines and transmission lines: these lines are responsible for passing your brakes and gear changes. If they do not get timely lubrication and rust or adhesion, you will not be able to stop or smooth gear change, not even a bit. This is a big problem. Check them regularly, especially when you're riding in a dusty or humid environment, and drop a few drops of oil.

Brake and hand speed: they are on the handlebar, brake and gear is a key part of the. On their turn points and adjust the drop 1-2 drops of oil on the nut to ensure normal operation. And then wipe off excess oil, to prevent the adsorption of dust.

Brake device: a few drops of oil on any of the rotating parts you can see on the brakes (mounted on the front and rear wheels). If these points are not easy to get, you can pinch the brake handle, look carefully where rotation. These parts of the metal parts of the relative movement is the need to lubricate the. Be very careful not to let the oil drip onto the brake block. Otherwise, there's no way to brake.

A drop of oil in the place where the foot pedal is connected to the crank. Also, let the oil on the rotating part.